Basic Info.
After-sales Service
Online Technical Supporting
Material Status
Solution, Cream
Drying Medium
Inactive Gas, Superheated Steam, Effluent Gas, Air
Application
Ical/Dyestuff/Pharmaceutical/Foodstrff/Metallurgy
Structure
Single Barrel, Double with Dryer
Features
High Thermal Efficiency
Drying Cycle
10 to 15 Seconds
Transport Package
Seaworth
Specification
Customizable
Product Description
Product Description
Principle of workCylinder dryer is a kind of rotating continuous drying equipment with internal heating and conducting. Certain thickness of materials film theres to the internal wall of the cylinder through pipes and misfired again to the external wall and to materials film, to evaporate and damnify moisture in materials film so as to dry materials. Dried material are then scraped out by the blade fitted on the surface of the cylinder, fall down to the spiral conveyor under the blade, and are conveyed, lected and packed.ApplicationIt is suitable for drying liquid raw materials or thick liquid in chem. Ical industry. dyestuff industry. pharmaceutical industry. foodstrff industry, metallurgy industry and so on.StructureMaydivide into two forms: single barrel, double with dryer, moreover, also may divide the atmospheric pressure and the reduced pressure according to the service pressure. Main applications and its features1.High thermal efficiency, The principle of heat transfer of the cylinder dryer is heat conduction whose conducting direction keeps identical whole operation circle. Except heat dissipation of end cover and radiation loss, all heat can be used for eva poration of wet materials on the wall the cylinder, Thermal deficiency can reach 80-90%.
2.Large operation elasticity and wide application. Various drying factors of the cylinder dryer can be adjusted, such as density of feeding aerials/thicd kness of materials film, temperature of heating medium,rotating speed of the cylinder etc. which can change drying speed of the under dryer, As these factors have no interrelations each other, it brings about great convenience to drying operation. and makesit applicable to various of materials and to meet different requirement of production.
3.Short drying period. The drying period of materials is 10 to worked 15 seconds normally, so it is suitable for heat-sensitive materials. It can be . also rated under less pressure condition if it is put in vacuum.
4.Fast drying rate. As film of materials coated on the wall of the cylinder is very thin. Normally. thickness is 0.3 to 1.5 mm. plus directions heat and mass trans mitting are identical, the evaporation strength on the surface of the film can keep at 30-70 kg.h20/m2.h.
Product Parameters
Model | Hg | 5/5 | 5/10 | 5/15 | 9/10 | 9/15 | 9/20 | 9/25 | 9/30 | 10/30 | 15/25 | 15/30 | 15/35 | 15/40 | 15/52 | 20/40 | 20/52 |
Heating area | m3 | 0.75 | 1.5 | 2.3 | 2.8 | 4.2 | 5.6 | 7 | 8.4 | 9.4 | 14 | 14 | 16.5 | 18.8 | 24.5 | 25.1 | 32.7 |
Diameter | mm | 500 | 500 | 500 | 900 | 900 | 900 | 900 | 900 | 1000 | 1500 | 1500 | 1500 | 1500 | 1500 | 2000 | 2000 |
Length | mm | 500 | 1000 | 1500 | 1000 | 1500 | 2000 | 2500 | 3o00 | 3000 | 2500 | 3500 | 3500 | 4o00 | 5200 | 4000 | 5200 |
Long | amm | 2000 | 2500 | 3000 | 3000 | 3500 | 4250 | 4750 | 5250 | 5250 | 5200 | 6250 | 6250 | 6750 | 7500 | 7000 | 7500 |
wide | bmm | 1500 | 1500 | 1500 | 2000 | 2000 | 2000 | 2000 | 2000 | 2750 | 3250 | 3250 | 3250 | 3250 | 3250 | 4050 | 4050 |
High | cmm | 2750 | 2950 | 3150 | 3250 | 4000 | 4750 | 5500 | 6000 | 6000 | 6000 | 7000 | 7000 | 7500 | 7500 | 7500 | 8000 |
Host weight | t | 1.6 | 1.8 | 2.0 | 5.4 | 6.3 | 7.2 | 8.2 | 9.1 | 11.2 | 12.2 | 12.8 | 13.3 | 14.2 | 22 | 22.4 | 28.7 |
Total weight | t | 1.8 | 2.1 | 2.3 | 5.6 | 6.6 | 7.7 | 8.8 | 9.9 | 12 | 13 | 13.8 | 14.5 | 15.6 | 23.5 | 23.9 | 30.5 |
Steam consumption | 0.4mpa/m | 6 | 9 | 13 | 18 | 2 | 22 | 24 | 26 | 30 | 40 | 45 | so | 55 | 80 | 85 | 98 |
Use | kw min | 1.5 | 1.5 | 2.2 | 2.2 | 3 | 3 | 4 | 4 | 4 | 5 | 5 | 6.5 | 7.5 | 11 | 11 | 15 |
Power | max | 7.5 | 7.5 | 9 | 11 | 15 | 18.5 | 30 | 36 | 36 | 45 | 55 | 60 | 60 | 60 | 75 | 80 |
Sketch of structure
Company Profile
Enterprise Spirit: Management, the soul; people, the foundation;
Enterprise culture: Diligence rewarded by God, honesty rewarded in business. and perfection rewarded in professionalism;
Enterprise policy: Good quality for surviving and development;
Enterprise Characteristic: people-oriented in guidance; common efforts in action.
Jiangsu Shuntong Drying Technology Co., Ltd. is located in Changzhou City, Jiangsu Province, a famous industrial city. It is a professional enterprise specializing in equipment design, manufacturing, sales and industrial heat energy research. It is currently a professional and systematic enterprise in the production of drying equipment in China. China's drying technology industry enjoys a high reputation.
The company has complete production equipment, including 50 sets of various processing equipment. In order to improve product quality, the company uses CNC flame cutting machines, and has industry-specific equipment such as folding machines, shearing machines, plate rolling machines, and resistance welding machines. The metal cutting machine tool in the metal processing workshop is fully equipped with planing, milling, drilling and so on. The company's equipment operators are skilled workers with rich experience. The company has sufficient raw materials, complete hardware warehouse accessories, and the annual production capacity of various drying equipment exceeds hundreds of sets.
The company pays attention to technology research and development, and the technical directors are experienced senior engineers with 20 years of experience in drying equipment design and production. The company has a number of patents. (Closed circulation boiling drying unit, closed circulation spray drying unit, waste heat recovery heat exchanger, low temperature belt drying unit) The company adopts the advanced management concept of combining China's national conditions and the actual development of the enterprise, and constantly attracts high-quality, high-level employees. The joining of management and technical talents has rapidly improved the competitiveness of the company, established an ISO9001 international quality certification system, and a complete set of advanced product research and development, processing and testing equipment, and cultivated a group of dedicated and strong service teams. Years of hard work, the company has accumulated a wealth of pharmaceutical, chemical, food and other drying equipment design, manufacturing experience, the products are widely used in various industries.
The company always adheres to the business philosophy of people-oriented and honesty first, attaches great importance to the introduction and cultivation of talents, pays close attention to technological innovation, strictly grasps quality management and continuously strengthens the professional construction of enterprises to stand out in the fierce market competition.
We adhere to the style of following people's hearts and working together to act together. We sincerely welcome friends from all walks of life to visit us for guidance, professional exchanges, and technology seminars. We will provide you with the best quality products and thoughtful services. Let us work together to create brilliant!
Certifications
Exhibition
Packaging & Shipping
PACKAGE:Standard export carton packing.
DELIVERY TIME:3-20 days after confirming order,detail delivery date should be decided according to production season and order quantity.
FAQ
Q Are you trading company or manufacturer?
A We are factory.
Q How long is your delivery time?
A Generally within 30-60 working days after receiving the payment.
Q Do you provide samples? is it free or extra?
A Yes, we could offer the sample .Considering the high value of our products ,the samples is not free , but we can give you best price including the freight cost.
Q What is your terms of payment?
A 95% payment before shipment or according to the terms agreed with the customer, the remaining 5% as the quality guarantee deposit, one year later.
Address:
No. 8Xujiawan, Zhenglu Town, Tianning District, Changzhou City, Jiangsu Province
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Jiangsu Shuntong Drying Technology Co., Ltd. is located in Changzhou City, Jiangsu Province, a famous industrial city. It is a professional enterprise specializing in equipment design, manufacturing, sales and industrial heat energy research. It is currently a professional and systematic enterprise in the production of drying equipment in China. China′s drying technology industry enjoys a high reputation.
The company has complete production equipment, including 30 sets of various processing equipment. In order to improve product quality, the company uses CNC flame cutting machines, and has industry-specific equipment such as folding machines, shearing machines, plate rolling machines, and resistance welding machines. The metal cutting machine tool in the metal processing workshop is fully equipped with planing, milling, drilling and so on.
The company′s equipment operators are skilled workers with rich experience. The company has sufficient raw materials, complete hardware warehouse accessories, and the annual production capacity of various drying equipment exceeds 200 sets.
The company pays attention to technology research and development, and the technical leaders are all experienced senior engineers with 20 years of experience in the design and production of drying equipment. The company has a number of patents. (Closed circulation boiling drying unit, closed circulation spray drying unit, waste heat recovery heat exchanger, low temperature belt drying unit).
The company adopts the advanced management concept of combining China′s national conditions and the actual development of the enterprise, and constantly attracts high-quality, high-level management and technical personnel to join in, so that the core competitiveness of the enterprise has been rapidly improved, and the s09001 international quality certification system has been established. A set of advanced Product research and development, processing and testing equipment have cultivated a group of dedicated and strong service teams. Through years of hard work, the company has accumulated rich experience in the design and manufacture of drying equipment for pharmaceuticals, chemicals, and food. The products are widely used in every industry.